Best MTB Handlebars
Handlebars are the best asset for all mountain bikers because it helps to maneuver across rigorous terrain and uneven gradients. Handlebars are crucial for maintaining the position and therefore the balance of the bike. It helps to regulate the steering and therefore the technical precision of the bike.
The Handlebars are basically an extension of the forearms and hands. they assist make sure the most optimum results for mountain biking both in tough trails and also in daily commuting.
A pair of best MTB handlebars may be a cheap upgradation which will last the biker for ages. it’s important to locate the simplest bike handlebar because the best bar with the perfect grips helps keep the bike pointing within the right direction. Choosing the best bike bar and setting it up right is vital to unlock the potential of the mountain bike.
We’ve listed a number of the simplest 6 MTB handlebars and have weakened all their integrities to assist our readers find the proper pair of the bars that suits one’s needs. For those trying to find an upgrade for mountain, bike handlebars our guides’ helps find the most effective fits and handles.
Best MTB Handlebars
Quick Answer: The 6 Best MTB Handlebars – 
- RaceFace Atlas Mountain Bike Handlebar
- Origin8 ProSweep MTB Handlebar
- SUNLITE Northroad Touring Handlebar
- Thomson Bike Products Carbon Fiber MTB Handlebars
- Bike Handlebars, Bike Riser Bar Aluminum Alloy Handlebar
- RXL SL Carbon Drop Bars Bicycle Handlebar Carbon Fiber Handlebars
Best MTB Handlebars Reviews
- Dimensions: 32 x 4 x 2 inches
- Weight: 12 ounces
- Clamp diameter: 31.8mm or 35 mm
- Width: 785 mm or 800 mm
- Seamless air alloy material
- Low and wide riser geometry
- Warranty: 5 years
It features an indoor taper to reinforce its durability and strength without adding any weight. The ultra-wide and ultra-low riser geometry of the handlebar decreases the peak of the cockpit, which lowers at the front for an aggressive ride.
The standard version of the clamp is about 32 mm while the newer clamp version is about 35 mm. the 35 mm length MTB handlebar features a width of 15 mm. even at such an additional width, the handlebar weighs just 300 grams.
The most of its user’s review that the bar feels such a lot light and agile and climbs sort of a boss, compared to its rivals. They also state that it doesn’t get scratched easily and may be a well-made product for mountain bikes.
- Weight: 290 grams
- Width: 31.8 mm
- Rise: 0 mm
- Back sweep: 6 degrees
- Material: Aluminum
- Tubular alloy construction
The flat bar is right for explore a number of the most effective trails in mountain terrain because it features locking rips. These grips are adjustable to suit the bar with the bike and are of solid and light-weight aluminum. Most of its users state that even with everyday riding, the bars stay in perfect shape. They never slide out of their position and slip and are much easier to use as compared with rubber grips.
- Dimensions: 23 x 11 x 4 inches
- Weight: 13.6 ounces
- Material: alloy steel
- Width: 21 inches
- Rise: 3.5 inches
- Center diameter: 1 inch ( 25.4 mm)
Others feel that if they take up a rather crouched stance they appear easier and snappy. Nevertheless, users up haul the merchandise for its durability and shock absorbent power.
The swept back handlebars make an interesting difference within the handlebars of mountain bikes, they become easy to handle. The upright position for riding becomes much comfortable without bothering the lower back and therefore the wrists much.
Replacing the old handlebars with the Touring handles takes but twenty minutes and therefore the entire process is pretty simple. people that perform tons of urban commuting recommend the merchandise greatly.
Because the handlebars are quite narrow, about 5-6 inches but traditional bike bars, it’s ready to squeeze through tight spots efficiently. It feels much lighter than a steel bar but is extremely strong.
- Material: Aluminum and titanium
- Molding: Expanded polystyrene mandrel type
- Width: 730 mm
- Rise: 12 mm
- Back sweep: 6 degrees
- Upsweep: 4 degrees
- Weight: 215 grams
The ends of the handlebars have extra fibers to stop damage from impacts with the bottom . They best protect against crash damages also . they assist to shorten the length for those that aren’t willing to use the whole 730 mm of the bar.
The width of the bar is 730 mm and therefore the rise is 12 mm, it weighs just 215 grams, reducing the load of the front of the handlebar. The road bar is currently available in four widths starting from 40 to 46 cm with drops specific to every size.
For the 42 cm bar, the drop is at140 mm and therefore the reach 78.5 mm. The slight wing shape on the highest section of the bar makes it comfortable to put the hand while riding.
- Material: 7050 alloys of aluminum
- Size: 31.8 mm diameter
- Width: 780 mm
- Controlled precision bending
- Hard anodized handle bar
- Weight: 287 grams for 20 mm rise and 309 grams for 35 mm rise
All of their cycling components are a results of thoughtful engineering and feedbacks from athletes. The handlebars are of alloys of aluminum with a diameter of 31.8 mm.
The width of the handlebar is about 780 mm and features a controlled precise bending. The hard anodized handlebar weight pretty less for a cushty mountain riding. CNC process technology is that the basis of the hollowing process of the handle bar rendering its lightweight property and strength.
The handlebar risers are of T6 aluminum alloy, black steel and gold titanium screws. The patent threaded holes within the riser are concise and also look beautiful.
- Product weight: 230 grams
- Material: carbon fiber
- Available sizes: 400 mm/ 420 mm / 440 mm
- Drop: 127 mm
- Reach: 104 mm
- Routing: internal
The handle bar is out there in three different lengths with its clamp diameter at 31.88 mm. the colour schemata and therefore the appearance of the handle bar are excellent its mounting is additionally pretty simple and straightforward . Users need to choose the proper size of the bar counting on their bike.
The best advantage of the bike is its super strong and excellent quality carbon fiber. It features a cool and vibrant appearance, comfortable for all sort of users. The handle bar is out there in both bent and straight designs and features a superb price- quality ratio. the merchandise is out there during a range of colours to settle on from.
Buying Guide For Best MTB Handlebars
Properties of Mountain Bike Handlebars:
- Handling vibration
- Weight of the handlebar
The size of the handle bars decides on its success on the roads., the peak , width and angle of the bar determines on how well it suits the body and therefore the riding sort of the biker.
The development of most handlebars is of sturdy metals and features the planning to face up to rigorous mountain biking.
handlebars should be ready to handle vibration. Ideally, handlebars flex with load and a few of them have the planning to handle more flex than others. Most of the flex are easy on the joints, though an excessive amount of flex impacts the joints and handling efficiency.
Weight of The Handlebar:
Lighter the handlebar better is its efficiency. Lighter bars cost more especially if they’re strong and lightweight .
The diameter of the middle clamp should match with its stem. The 31.8 mm diameter is extremely common in handlebars. 35 mm is that the new standard, whereas 25.4 mm is that the old standard, 22.2 mm is that the common standard for jump bikes.
The width of the bike in millimeters must be more to please present day mountain bikers. Bikes that are 800 mm or wider are ideal for downhill riding, Bike Park riding and for those with wide shoulder length. Widths that are 700 mm and fewer are narrow handles, ideal for XC racing and for lean riders with narrow shoulder length. However, the width of the bar that one chooses may be a matter of their preference.
Handlebars are shaped during a way that their grip area is above the stem clamp zone at the middle of the bar. Rise helps in riding the bike comfortably and confidently. the increase may range from 0-50 mm and a couple of handle bars even have a negative rise.
The angles through which the grip of the handlebar is pointed both up and back are referred to as back sweep and upsweep. Most of the traditional handlebars have 4 degrees of up sweep and 9 degrees back sweep. Majority of the progressive designs have 12 or more degrees of back sweep whereas radial alt bars have 20 -45 degrees of back sweep.
Most of the handlebars are of sturdy materials in order that they’re ready to handle the toughness of the trail without bothering the rider much. they’re of corrosion resistant material and are extremely durable through all thick and thin of mountain driving. The common handlebar materials are as follows,
- Aluminum: Aluminum is that the commonest handle bar material. Aluminum handlebars are cheap, strong and at an equivalent time lightweight.
- Carbon fiber: carbon fiber is robust and light-weight . These handlebars flex efficiently, damp vibrations from the trail and saves wrist and shoulder joints. Carbon fiber handler bars are a touch expensive as compared to Aluminum bars. Cheap and poorly made bars have a risk of breaking prematurely.
- Titanium: Titanium is very light for the strength it offers. the fabric is additionally expensive and features excellent vibration absorption properties. Titanium handle bars lasts longer than most of the opposite materials.
- Steel: steel handlebars look sleek and are extremely strong when featured with stainless steel .
How to Choose Best MTB Handlebars?
The handlebars of mountain bikes demand tons of input from the upper body of the rider at the front of the bike. Handlebars can make a superb difference within the quality of the ride be it performing an aerial maneuver or in straining to stay the front wheel inclined on a steep trail. Handlebars also feature different bends and are available in several colors and heights so on help the riders choose the simplest one for his or her driving style.
- Sort of handlebars
- Bar mechanics
- Cost of the bar
- Cut marks and reference marks
Leverage is additionally referred to as torque, this factor determines the extent of stability and control that’s exert on the bike. Wider handlebars have short step and greater leverage. With great leverage, the biker is positioned centrally on the bike with the load of the rider distributed evenly. to find out if the handlebar offers enough torque, the rider has got to measure the space between the hands while leaning on the bike. the space should be adequate to the shoulder width when kept apart.
The handlebar shouldn’t force the rider to bend drastically to take care of the grip. The pressure on the hands and wrist makes them go numb. To avoid the discomfort, the handlebar should be kept equidistant from the saddle to the length of the arm extension. If the location of the hands is just too much opened up or if the shoulders are arched over the bar then that’s an uncomfortable driving position.
Sort of Handlebars:
The different sorts of handlebars for various bikes are downhill bars, race bars; dirt jump and park riding bars and mountain specific handle bar designs.
- Downhill bars: these are the widest and range between 0-2 inches rise. they’re of carbon fiber or aluminum make. They require oversize stems and are extremely strong.
- Dirt jump bars are tall with an increase of 2-3 inches. they’re made from aluminum chrome and are available in both standard and oversize diameters.
- Cross country handlebars: they’re generally narrower and are made either of carbon fiber or aluminum. they’re low rise bars with the diameter of but an in.
- All-mountain bars: They fall between downhill and race bars and are made from an equivalent wide, rise and materials.
The size of the handle bar is that the comprehensive total of its width, step clamp and rise diameters. Most of the mountain bike handle bars have a width range of 26-31.5 inches. the increase ranges from 1-3 inches and therefore the clamping diameters are either 25.4 mm or 31.8 mm.
The mechanics of the bar depends on its strength, width and weight. the fabric of the bar determines these mechanics. Most of the cross-country, down-hill and every one mountain bars are available in carbon fiber and Aluminum. The materials are tangled very close within the bar in order that they’re ready to withstand the tough vibrations of riding in mountain terrains.
Cost of The Bar:
The price range of most of the mountain bars is between $30 and $275. they’re available in several rise options and are durable and hard at a competitive cost. Most of the Aluminum models and therefore the carbon fiber handle bars are available within the price range of $75-$150 and are the simplest upgrades for any bike. Bars that are the within the price point of $150-$275 are lightweight and are excellent upgrades for bikes utilized in the race , downhill and every one mountain riding.
Cut Marks and Reference Marks:
Mountain bikers should learn to urge their controls at an equivalent angle by visualizing, but guesswork might not hold good in the least times. variety of manufacturers have reference marks printed on the bars. These cut marks are the simplest to trim the bar without a tape .
Mountain biking is an art and therefore the handlebars makes it proficient in exploring the mountain trails easily with the bikes. We hope our guide helps you with all the specified knowledge on mountain biking and helps you in choosing the best MTB handlebar.